Home Heating
Equipment Service Policy
Click here for printable flyer.
 Our
Preventive Maintenance Tune-Up, completed by technicians, consists of a 30
point check designed to keep your burner functioning at its peak and maximum
efficiency.
- Check, clean and calibrate
thermostat
- Initial combustion test
- Clean gun assembly or
distributor
- Brush and vacuum unit, smoke
pipe, and chimney base if necessary
- Clean burner fan and
housing
- Clean oil filter pan
- Replace oil filter cartridge and
gasket
- Clean or replace pump
strainer
- Clean electrodes and/or replace
if necessary
- Check pump/vacuum pressures
- Check firing rate and make
necessary adjustments
- Clean, test, and calibrate all
controls
- Clean bi-metal element of stack
control, or cad-cell eye
- Motors examined for condition,
lubricated & tested for performance
- All circulators examined,
lubricated and tested as above
- Drain expansion tank if necessary
- Make necessary burner and draft
adjustments
- Flush low water cut-off and clean
if necessary
- Clean or install new gauge glass
if necessary
- Adjust and tighten pulleys as
needed
- Replace fan belt if necessary
- Replace air filters
- Investigate for air leaks
- Seal any air leaks where
found
- Check all fittings for proper
sealing
- Check oil lines and O.S.V. valve
(where existing) for leaks, brittleness & proper operation
- Firomatics checked for operation
and safety
- Final check of ignition system
& firing rate with the latest equipment (final combustion)
- Make final adjustments if
necessary
- Wipe equipment and clean area
 Please Note: Upon completion of the tune up, you will
receive a detailed description of both your unit's efficiency and a
comprehensive report of our technician's observations/recommendations.
If you would like to sign up for this plan you can
print the agreement and mail or
fax it to us. |
|
